skip to content »

Dlink dynamic dns not updating

This article will show you how to set up a free account, configure your router to update the DDNS server with your dynamically changing IP address, and open the ports necessary to access your resources from the Internet.

dlink dynamic dns not updating-40dlink dynamic dns not updating-75dlink dynamic dns not updating-36

You may have a home network with a permanent-on broadband connection that allows you to access the outside world anytime 24/7, but how do you go the other direction and access your home network from the public Internet?This can save you from having to carry around external hard disks if you have decent internet access. Once signed up, login – make sure you this whilst on the same network as your NAS 3. The free version allows you to only create one Host – which is all you need really. With that done log into your NAS admin page and navigate to the Network Management area and fill out the Dynamic DNS settings with those you choose in step 4. Once you have saved the settings you can now need to log into your router and forward traffic on port 80 / 443 to the internal IP address.This short tutorial shows you how to set up a free account with DLink and then configure your NAS. Refer to your router instructions or have a look at the following link for some advice.Windows Remote Desktop defaults to TCP 3389, but you can have only one machine using this port when you're sharing a single IP address.If you want to open up a second computer for Remote Desktop, you'll need to configure a nonstandard port.This might be possible if you wanted to spend two to four times the money on a broadband account with a static IP address (an Internet Protocol address that doesn't ever change), but that's not feasible for everyone.

Fortunately there is a free and easy solution to solve this problem with DDNS (Dynamic DNS) service from Dyn

Anything coming from the public Internet going to port 3389 (used for Remote Desktop or Terminal Services) will get rerouted to the internal host

Port 3390 is a nonstandard port I chose for a second Remote Desktop host that will get rerouted to internal host

Once your fully qualified DDNS name is visible from the Internet, you'll need to open the appropriate ports to access the applications you want.

In Figure C, in the Applications Gaming section and under Port Range Forward, you'll need to add some ports.

There, you'll need to fill out some personal information and provide a valid e-mail address for confirmation, along with the username and password.